Apply [all] dp of additional space along each edge of the content.

ArcPaddingValues

The modifier to be applied to the CurvedRow.

modifier

The angle at which children are laid out relative to, in degrees. An angle of 0 corresponds to the right (3 o'clock on a watch), 90 degrees is bottom (6 o'clock), and so on. Default is 270 degrees (top of the screen)

anchor

Specify how the content is drawn with respect to the anchor. Default is to center the content on the anchor.

anchorType

Specifies the radial alignment for children, if not specified, children can choose their own radial Alignment. Alignment specifies where to lay down children that are thiner than the CurvedRow, either closer to the center (INNER), apart from the center (OUTER) or in the middle point (CENTER).

radialAlignment

Specify the direction the children are laid on. See [CurvedDirection.Angular]. The default is [CurvedDirection.Angular.Normal], which is clockwise under a LtR layout and counter clockwise on a RtL layout.

angularDirection

Specifies the content of this layout, currently there are 5 available elements defined in foundations for this DSL: the sub-layouts [curvedBox], [curvedRow] and [curvedColumn], [basicCurvedText] and [curvedComposable] (used to add normal composables to curved layouts

contentBuilder

A layout composable that places its children in an arc, rotating them as needed.

CurvedLayout

Specifies the default radial alignment for children that don't specify one. Radial alignment specifies where to lay down children that are thiner than the CurvedRow, either closer to the center (INNER), apart from the center (OUTER) or in the middle point (CENTER).

Specify if the children are laid out clockwise (the default) or counter-clockwis

clockwise

CurvedRow

a function that returns true when the [content] is active in the composition and requires the focus

requiresFocus

content

Coordinates focus for any composables in [content] and determines which composable will get focus.

HierarchicalFocusCoordinator

The associated [FocusRequester] to request focus on

focusRequester

Use as part of a focus-requiring component to register a callback to automatically request focus when this component is active.

RequestFocusWhenActive

The modifier to be applied to the component

state

contentPadding

reverse the direction of scrolling and layout, when `true` items will be composed from the bottom to the top

reverseLayout

The vertical arrangement of the layout's children. This allows us to add spacing between items and specify the arrangement of the items when we have not enough of them to fill the whole minimum size

verticalArrangement

the horizontal alignment applied to the items

horizontalAlignment

Logic describing fling behavior. If snapping is required use [ScalingLazyColumnDefaults.snapFlingBehavior].

flingBehavior

whether the scrolling via the user gestures or accessibility actions is allowed. You can still scroll programmatically using the state even when it is disabled.

userScrollEnabled

The parameters to configure the scaling and transparency effects for the component

scalingParams

How to anchor list items to the center-line of the viewport

AutoCenteringParams parameter to control whether space/padding should be automatically added to make sure that list items can be scrolled into the center of the viewport (based on their [anchorType]). If non-null then space will be added before the first list item, if needed, to ensure that items with indexes greater than or equal to the itemIndex (offset by itemOffset pixels) will be able to be scrolled to the center of the viewport. Similarly space will be added at the end of the list to ensure that items can be scrolled up to the center. If null no automatic space will be added and instead the developer can use [contentPadding] to manually arrange the items.

autoCentering

ScalingLazyColumn

The mandatory action that needs to be added to the component.

action

The [RevealState] of this component. It can be used to customise the anchors and threshold config of the swipeable modifier which is applied.

An optional lambda which will be triggered when a full swipe from either of the anchors is performed.

onFullSwipe

The optional action that can be added to the component.

additionalAction

The optional undo action that will be applied to the component once the mandatory action has been performed.

undoAction

The content that will be initially displayed over the other actions provided

A composable that be used to add extra actions to a composable (up to two) which will be revealed when the original composable is swiped to the left.

SwipeToReveal

We extracted all components found in the Wear Compose Foundation library in one place. Explore all available and add them to your project.

Jetpack Compose Wear Compose Foundation components

Bring your next idea to life with Compose UI